How do I align my UniFi antenna?
Point the CPE in the general direction of the AP, then log into it.
- Once logged in, open the scan list and select the AP’s SSID.
- Once the connection has been established, open the alignment tool and start very slowly panning the antenna from the left to the right keeping in mind the best signal that appears.
How do you set a multipoint point?
- Choose the |Wireless| tab, and only change: Wireless Mode: Station. WDS: [X] Enable. Click the Change button.
- Choose the |Network| tab, and only change: IP Address: 192.168. 1.3 (increment by x.x.x.+1 for each additional Customer Radio skipping 192.168. 1.20)
- Repeat these steps for all Customer Radios.
Which tool is used for antenna alignment?
The Sunsight AAT AntennAlign Alignment Tool is a highly accurate alignment tool used during equipment installation. It measures alignment in azimuth, tilt, and roll while also indicating its height above ground… The 3Z Telecom RF Aligner GPS Antenna Alignment Tool is the most compact in the industry.
How do you align air fiber?
Open up the alignment tool in the AirOS WebUI and have one installer slowly adjust the azimuth on one antenna until you see the signal get better, then worse again. Once you are losing signal, start backing up the azimuth until you reach the peak signal. Repeat step 6 for the elevation.
How does point to multipoint wireless work?
Point-to-multipoint wireless is defined by the fact that one of the devices in the network (the “point”) can communicate over radio waves with several other devices at the same time (hence “multipoint”). Devices in the former class are usually dedicated to serving as communication nodes and are called base stations.
What is point to multipoint topology?
Point to multipoint networks are just what they sound like: One central node or hub communicates with several, up to hundreds in some cases, or end nodes. This is often also referred to as a star topology. Star topologies are ideal for networks where there are a lot of nodes to be connected in a dense environment.
What is WiFi bridge mode?
Bridge mode lets you connect two routers without the risk of performance issues. Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict. Connecting multiple routers can extend the Wi-Fi coverage in your office/home.
What is a wireless point-to-point bridge?
In Wi-Fi networking, a point-to-point wireless bridge lets users wirelessly connect two or more locations together. This bridge enables users to share an Internet connection between two or more locations and to share files and other types of data across the network.
How much is a smart aligner?
At the price of $4,995 for the base system, come see why the Smart Aligner is the smart choice for all your antenna alignment needs.
How do I reset my air fiber?
Interface Description Reset To reset to factory defaults, press and hold the Reset button for more than five seconds while the unit is powered on. Data 10/100/1000 Mbps port handles all user traffic.