Does a carbon fiber seatpost make a difference?
By having a set spring rate, a heavier rider will enjoy a more comfortable ride, while a lighter rider will feel more vibration and big hits. Carbon seatposts also perform much better with more exposed seatpost (2x more flex), which hands the better performance to taller riders.
Where are Zipp seatposts made?
Indianapolis
Zipp is best known for its high-end wheels, but the Indianapolis-based company also manufactures cockpit components, such as its Service Course SL aluminium stem and handlebar, and carbon fibre seatpost.
How do I stop my carbon seatpost sticking?
Pop the seatpost out and turn the frame upside-down to drain out any trapped water. Carbon doesn’t like harsh chemicals. A little silicone spray on a rag is enough to clean the dirt off.
How tight should my carbon seatpost be?
Follow the torque recommendation for the post. If it slips, tighten 1/4 turn at a time until it doesn’t slip any more. Carbon posts most certainly can react with the metal of a frame and become badly stuck.
Can you put a carbon seatpost in an aluminium frame?
A carbon seat post may get stuck in an aluminum frame even when carbon paste is applied. The chances are low, but the outcome is not unheard of when the seat post isn’t removed over a long period.
Can you use carbon seatpost in steel frame?
Condensed answer: A carbon seat post can be installed in a steel frame but has to be covered in a thin layer of carbon assembly paste. The carbon assembly paste serves two purposes – it increases the friction between the seat post and the seat tube while also protecting the parts from corrosion.
Are Zipp handlebars good?
Supremely comfortable and lightweight, the Zipp Service Course SL-70 XPLR excels as an all-road handlebar. Its short and shallow dimensions feel great, allowing you to move from the hoods to the drops with ease, never having to sacrifice control.
Where are Zipp handlebars made?
In October 2010, Zipp relocated from its original design and manufacturing facility in Speedway, Indiana to an expanded site in Indianapolis.
Do you grease a carbon seatpost?
You should grease your seatpost on the segment that fits into the seat tube to prevent oxidation and corrosion. Grease also prevents jamming of the seat post in the seat tube and gets rid of creaks. However, you shouldn’t grease carbon fiber seatposts with regular grease.
How many nm does it take to tighten a carbon seatpost?
Got Torque?
| Bottom Bracket | |
|---|---|
| 300-360 lb/in (32.9-40.7 Nm) | |
| carbon fiber seatpost | 65-80 lb/in (7.3-9 Nm) |
| new Madone seatmast clamp bolts | 44-61- lb/in (5-7 Nm) |
| Equinox hidden binder | 65-80 lb/in (7.3-9 Nm) |
How many nm are in a carbon seatpost?
It usually states the torque figure on the seatpost clamp and also it should state in the documentation that came with the seatpost. If you are using carbon grip paste it should be between 3 – 5nm.