What does RS on chain mean?
Each manufacturer adds its own identification stamp prior to the chain number. For Tsubaki, “RS” is the identifier (for example, RS80, RS100). The use of “RS” as an identifier has spread widely; it has become the standard symbol for power transmission roller chains. There are smaller chains available.
How many Teeth in RS 200 chain Sprocket?
Rolon ( Brass coated ) Chain Sprocket kit for Bajaj Pulsar (O ring) Part number: HPORC240 Front Sprocket: 14 Teeth Rear Sprocket: 41 Teeth Rear Sprocket holes: 6 Chain Liks: 110 Maintenance Clean the chain with Kerosin or Liqui Moly chain cleaner Lube the chain with Liqui Moly fully synthetic chain lube…
What size is 428 chain?
428 Non-Standard Roller Chain
| Part No. | 428 |
|---|---|
| Pitch (P) | 0.500 |
| Pin Diameter (D) | 0.176 |
| Roller Width (W) | 0.312 |
| Roller Diameter (R) | 0.335 |
How do you read a chain number?
Chain Dimensions Chain types are identified by number; ie. a number 40 chain. The rightmost digit is 0 for chain of the standard dimensions; 1 for lightweight chain; and 5 for rollerless bushing chain. The digits to the left indicate the pitch of the chain in eighths of an inch.
How many teeth does a Duke 200 chain sprocket have?
The kit contains – 14 teeth front sprocket, chain and 42 teeth rear sprocket.
How many teeth are there in Pulsar 220 chain sprocket?
BAJAJ Pulsar220*Dtsi/S/F 36 Teeth Sprocket (Bajaj Pulsar 220 DTS-i Pack of 1)
| Brand | BAJAJ |
|---|---|
| Size | 36 |
| Material | Steel |
| Type | Rear |
| Sprocket Thickness | 10 |
Is 428 chain the same as 420?
A 420 and 428 are the same except width and the pins may be a little bigger diameter on the 428. They shouldn’t be though. Pin length should be the only difference.
How can you tell the difference between a 420 and a 428 chain?
The primary difference between 420 and 428 is the pitch of the links. A 130 link 428 chain will be longer (and generally speaking, heavier-duty) than a 130 link 420 chain.