What is Avantree Priva?
DESIGNED FOR ANALOG AUDIO OUTPUT DEVICES: The Priva III is the perfect solution to enable Bluetooth streaming from any device with an analog audio output e.g. TVs with RCA Audio ‘OUT’ or AV receiver with a big headphone jack. If your TV only has an Optical audio output, please consider the “Avantree Audikast” instead.
How do I pair my Avantree Bluetooth transmitter?
Get the Transmitter into Bluetooth Pairing Mode. Press & Hold button ”2”/ “B” until you see the Bluetooth indicator flashing RED & BLUE. 3.3. Put them close to each other and WAIT for them to pair & connect.
How do I pair my Avantree Priva 3?
Step 2: Getting the Priva III into Bluetooth Pairing Mode again. Press & Hold the Multi-Function Button on the transmitter (the large round button) for 5 seconds, the LED indicator on the transmitter start flashing RED & BLUE. Step 3: Getting the Second Device into Bluetooth Pairing Mode as well.
How to reset Avantree Priva III?
How to Factory Reset the Priva Series
- Step 1: Power on the Priva III.
- Step 2: Get the Priva III into BLUETOOH PAIRING MODE. Press & Hold the Multi-Function Button for about 5 seconds until the LED indicator starts flashing RED & BLUE.
- Step 3: Press & Hold the Multi-Function Button for 5 seconds AGAIN.
What is dual link low latency?
Dual Link Low Latency Bluetooth 5.0 Transmitter for TV/PC With the audio and video in perfect sync, you can enjoy your programs without any audio delay or lip sync error. The Audikast Plus also has two independent buttons for easy and intuitive control of 2 separate headphones. Dual link.
How do I reset Avantree Bluetooth transmitter?
Press & hold the “+” and “-” buttons simultaneously for 7 seconds. You’ll see both Bluetooth LED indicators light up PINK and turn off, indicating that the reset was successful.
How do I connect my Avantree transmitter to my TV?
Plug the RED/WHITE end of the RCA-AUX Converter Cable into the RCA AUDIO OUT port on the back of your TV. Take the 3.5mm Auxiliary Cable, and plug it into the BLACK end of the RCA-AUX Converter Cable. Plug the other end of the 3.5mm Auxiliary Cable into the AUX port on the back of your transmitter.
How do I connect my Avantree headphones to my laptop?
Turn the transmitter on by flipping the power switch to ON. Turn the headphones on by pressing & holding the MFB button (middle button) until you hear “Welcome to Avantree” from the headphones. The two devices should auto-connect right away.
How do you reset Avantree Bluetooth headphones?
Press and hold the volume + and – buttons simultaneously for about 5 to 7 seconds until the LED quickly flashes PINK twice, indicating that the Avantree Audition headphones have reset. The headphones should then go into pairing mode and the LED will alternate between flashing RED & BLUE.
What is the difference Tx and Rx Bluetooth?
Tx is transmit such as to Bluetooth speakers from a audio device. Rx is receive from a device (audio player of any sort) to Bluetooth headphones except AirPods.